TOSHIBA DK 16

IMPORTANT NOTICE REGARDING THE 2007 DAYLIGHT SAVINGS TIME MANDATE customer notice.

Leave the handset on hook, press intercom 6 5 2, then enter the time of a 24 hour clock (military time clock), entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds - enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 - usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom 6 5 2, 1 4 1 5 0 0, Redial Speaker.

IMPORTANT NOTICE REGARDING THE 2007 DAYLIGHT SAVINGS TIME MANDATE customer notice.

Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock (military time clock), entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds - enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 - usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker.

IMPORTANT NOTICE REGARDING THE 2007 DAYLIGHT SAVINGS TIME MANDATE customer notice.

Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock (military time clock) , entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds - enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 200 - usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker. 

IMPORTANT NOTICE REGARDING THE 2007 DAYLIGHT SAVINGS TIME MANDATE customer notice.

Do Not Pick Up Handset (Must be done at extension 200)
- Press #652
- Enter time in format HHMMSS (HH=hour, MM=minute, SS=second) in military time/24 hour clock
- Press #
- Press Spkr
- For example, if the time is 2:15 P.M., press # 6 5 2, 1 4 1 5 0 0, #, Speaker. 

To change Date (Must be done at extension 200):
- Press #651
- Enter date in format YYMMDD (YY=year, MM=month, DD=day)
- Press #
- Press Spkr

FROM ANY PHONE:

- Press 400 to get into voicemail

- Once answered, press * # 100, then password: 0000

- Press # (for Admin options)

- Press 7 (to change date & time)

- Follow Prompts

Press fixed PGM button

Dial #*

Dial #### ####

Press (on soft keys) SHOW, then SAVE, BACK, SHOW

Press BACK until it says SYSTEM TIME, then press SHOW

YEAR: Press CHG, dial XX  yr, press SAVE, then NEXT

MONTH: Press CHG..until proper month appears. Press NEXT

DAY: Press CHG, type date (01-31). Press SAVE, press NEXT

WEEKDAY: Press CHG until desired day apprears. Press NEXT

HOUR: Press CHG, type XX hr. Press SAVE, press NEXT

MINUTES: Press CHG..type XX minutes. Press SAVE, press NEXT

HANGUP.

You must go to EXT 20 - usually the receptionist phone.   Press SPKR # time button, enter the date - using 2 digits for the month and 2 digits for the day, enter 4 digits for the time using a 24 hour clock, press the time button, press Speaker.

For example, if the date is April 28th and the time is 2:15 P.M., press Speaker, # time button 0 4 2 8 1 4 1 5, the time button, Speaker.

1. At station/ext. # 10, press feature, 0, 0

2. Press the left intercom 2 times

3. Enter # 103

4. Enter the correct time in 24 hr. format, for example,

• to set the time for 09:00 A.M., enter 0900

• to set the time for 04:45 P.M., enter 1645

5. Press feature, 0,0

The time and date is a system feature rather than an individual telephone feature. To change the date in the Legend Magix system, from the System Programming console:

1. Press Menu

2. Press System Program

3. Press Exit or Start

4. Press System

5. Press Date. Enter in the following format: mmddyy (where MM is the month,

    DD is the day, and YY is the year)

6. Press Enter

7. Press Exit or Back

8. Press Home or Exit to exit programming mode